時效溫度對鎳鋁青銅合金的硬質相演變的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-05-06
采用自行熔煉牌號為ZQAl10-4-4的鎳鋁青銅合金(Cu-10%Al-4.7%Ni-3.5%Fe-0.8%Mn)，采用SEM、XRD、EDS、DSC、內耗測試、硬度測試、摩擦性能測試等分析手段，研究時效溫度對合金中硬質相的演變規律以及合金力學性能的影響。
時效溫度對鎳鋁青銅合金的硬質相演變的影響Effect of aging temperature on hard phase evolution of nickel aluminum bronze采用自行熔煉牌號為ZQAl10-4-4的鎳鋁青銅合金(Cu-10%Al-4.7%Ni-3.5%Fe-0.8%Mn)，采用SEM、XRD、EDS、DSC、內耗測試、硬度測試、摩擦性能測試等分析手段，研究時效溫度對合金中硬質相的演變規律以及合金力學性能的影響。結果表明:在450 ℃以上時效時，合金的硬質馬氏體轉變?yōu)檩^軟的α相基體，并隨著時效溫度的升高而導致彌散分布的K相聚集長大，使合金的硬度降低、摩擦磨損量增加。合金在420~450 ℃這一時效溫度區間，具有最佳顯微硬度(約420 HV)和較好的耐磨性能。
ZQAl10-4-4 nickel aluminum bronze (Cu-10%Al-4.7%Ni-3.5%Fe-0.8%Mn) was prepared. The effect of aging temperature on the hard phase evolution and mechanical properties of the alloy was investigated by SEM, XRD, EDS, DSC, internal friction, microhardness and wear tests. The results show that the alloy exhibits a phase transformation of hard martensite into soft α phase when aging above 450 ℃, and shows significant aggregation and growth of evenly-distributed K phases with the increasing of aging temperature. In the meantime, the alloy exhibits a decreasing microhardness and increasing wear with increasing the aging temperature. A maximum microhardness value of about 420 HV and good wear resistance are achieved when the alloy is aged at temperatures of 420-450 ℃.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.