新聞資訊
不銹鋼表面FeCoCrAlCuNiMox激光高熵合金化層的相演變
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-05-04
采用激光高熵合金化技術在2Cr13不銹鋼表面制備FeCoCrAlCuNiMox (x = 0, 0.5, 1) 激光高熵合金化層. 利用XRD, SEM, EDS及顯微硬度計對FeCoCrAlCuNiMox激光高熵合金化層相轉變機制、微觀組織形貌及硬度進行研究.
不銹鋼表面FeCoCrAlCuNiMox激光高熵合金化層的相演變PHASE EVOLUTION OF FeCoCrAlCuNiMox COATINGS BY LASER?HIGH-ENTROPY ALLOYING ON STAINLESS STEELS
采用激光高熵合金化技術在2Cr13不銹鋼表面制備FeCoCrAlCuNiMox (x = 0, 0.5, 1) 激光高熵合金化層. 利用XRD, SEM, EDS及顯微硬度計對FeCoCrAlCuNiMox激光高熵合金化層相轉變機制、微觀組織形貌及硬度進行研究. 結果表明, 2Cr13 不銹鋼基材主元素Fe, Cr 在激光輻照條件下參與了表面合金化過程, 形成了FeCoCrAlCuNiMox激光高熵合金化層; 隨著Mo含量的增加, 合金化層相結構逐漸由fcc+bcc雙相固溶體結構轉變?yōu)?/span>fcc+bcc+hcp三相共存, hcp相主要為Ni3Mo和Co7Mo6, 且Ni3Mo相含量高于Co7Mo6相, 熔池的凝固溫度在激光高熵合金化層相選擇過程中起到重要作用. 激光高熵合金化層顯微組織為典型的枝晶組織; 隨著Mo含量的增加, 枝晶內析出塊狀Ni3Mo和Co7Mo6相. FeCoCrAlCuNiMox激光高熵合金化層的顯微硬度在390~490 HV之間, 且Mo 含量的增加顯著提高高熵合金化層的硬度.?
High-entropy alloys (HEAs), defined as solid solution alloys which have at least 5 principal?elements but no more than 13 elements, with concentrations of each principal element ranging from 5% to 35% in?atomic fraction, are emerging as one of the hot research frontiers in the metallic materials field. The significance?of HEAs originates from their various combinations of high strength, good thermal stability and excellent?resistance to corrosion, wear and oxidation. HEAs exhibit simple solid solutions with bcc and/or fcc structure(s)?due to the effect of high mixing entropy in the solid solution state of HEAs, which may make the HEAs with?improved mechanical and physical properties. However, a small quantity of intermetallic compounds can also?form in certain HEAs, indicating that the formation of simple solid solutions cannot solely depend on the high?mixing entropy. Then, the theory of HEAs based on the concept of entropy-enthalpy competition to judge whether?or not simple phases will form was proposed. However, even if an alloy meets these criterions, it can still contain?intermetallic phases. Why and how these?intermetallics form in HEAs needs much more?clarification. In this work, Co-Al-Cu-Ni-Mox (x =?0, 0.5, 1) powder system with?close-to-equiatomic ratios was mixed and laser?surface alloyed onto 2Cr13 stainless steel substrates, and then the FeCoCrAlCuNiMox HEA coatings was obtained?by reaction synthesis of Fe, Cr with Co-Al-Cu-Ni-Mox powder. The phase transition mechanism, microstructure?and microhardness of FeCoCrAlCuNiMox coatings were investigated by XRD, SEM, EDS and microhardness?tester. Experimental results showed that the principal element of Fe, Cr in 2Cr13 stainless steel substrate?participated in surface alloying process during the laser irradiation, forming FeCoCrAlCuNiMox laser?high-entropy alloying coatings. With the increase of Mo content, the crystal structures of FeCoCrAlCuNiMox laser?high-entropy alloying coatings evolved from fcc+bcc two-phase solid solution to fcc+bcc solid solution with hcp?phase precipitations. The hcp phases were mainly Ni3Mo and Co7Mo6, and the content of Ni3Mo phase was higher?than that of Co7Mo6. The phase formation analysis indicated that besides ? and δ parameters, solidification?temperature of the molten pool must be considered during the phase selection, instead of melting point as?suggested previously. The microstructure of the coatings exhibited a typical dendrite structure. With the increase?of Mo content, the block-shaped Ni3Mo and Co7Mo6 precipitated in the innerdendritic regions. The microhardness?of the FeCoCrAlCuNiMox laser high-entropy alloying coatings was 390~490 HV, which significantly increased?with the increase of Mo content.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.