新型Al-Cu-Li-X合金熱處理強化及組織特征
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-29
采用正交試驗及其方差分析、最小顯著差數(LSD)法研究新型Al-Cu-Li-Ag-Mg-Zr-Ce合金的固溶和時效熱處理工藝，并采用電導率、SEM、EDX、TEM等測試手段對合金熱處理過程中組織結構和性能進行分析。
新型Al-Cu-Li-X合金熱處理強化及組織特征Heat treatment strengthening and microstructure characteristics of novel Al-Cu-Li-X alloy采用正交試驗及其方差分析、最小顯著差數(LSD)法研究新型Al-Cu-Li-Ag-Mg-Zr-Ce合金的固溶和時效熱處理工藝，并采用電導率、SEM、EDX、TEM等測試手段對合金熱處理過程中組織結構和性能進行分析。結果表明：該合金在固溶(520 ℃，1.5 h，水冷)和時效(180 ℃，18 h，空冷)處理后，T6態顯微硬度比軋制態的提高100.8%，T87態強度值達到623 MPa。固溶過程中，大量Ce、Cu、Mg、Zr溶于基體起到固溶強化作用；時效時細小片狀強化相T1和薄盤狀θ′相均勻彌散在基體中析出，具有強烈沉淀強化效果。
Solid solution and aging treatment of novel Al-Cu-Li-Ag-Mg-Zr-Ce alloy was investigated by orthogonal experiment variance analysis and least significant difference (LSD) methods. Meanwhile, the microstructure characteristics and mechanical properties were explored by electrical conductivity (EC) test, scanning electron microscopy (SEM), energy dispersive X-ray spectrum (EDX) and transition electron microscopy (TEM). The results show that the micro-hardness of alloy under T6 condition are improved by 100.8% compared to that of rolling one, and the strength for alloy under T87 condition also reaches to 623 MPa after solid solution (520 ℃, 1.5 h, water quenched) and aging treatment (180 ℃, 18 h, air quenched). During solid solution, a lager amount of Ce、Cu、Mg and Zr atoms dissolve into the matrix, resulting in a strong solid solution strengthening. During the aging treatment, many fine needle-shaped T1?phase and plate-shaped θ′ phase precipitate in the matrix uniformly and dispersively, leading to an enormous precipitation strengthening.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.