TC18鈦合金耳片的斷口形貌及疲勞性能
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-27
對TC18鈦合金直耳片的疲勞性能進行研究，測試在不同處理狀態及平均應力水平下耳片的疲勞Smax—N曲線，并利用掃描電鏡(SEM)對疲勞試樣斷口的典型裂紋源形貌和裂紋擴展形貌進行觀察分析。
TC18鈦合金耳片的斷口形貌及疲勞性能Fractograph and fatigue behavior of?TC18 titanium alloy lugs對TC18鈦合金直耳片的疲勞性能進行研究，測試在不同處理狀態及平均應力水平下耳片的疲勞Smax—N曲線，并利用掃描電鏡(SEM)對疲勞試樣斷口的典型裂紋源形貌和裂紋擴展形貌進行觀察分析。結果表明：熱處理狀態和平均應力對耳片疲勞壽命有較大影響；在相同的平均應力下，機械加工后退火處理的試樣具有較高的疲勞壽命；在相同退火處理狀態下，平均應力水平高，疲勞壽命長；疲勞裂紋主要在夾雜物、材料表面缺陷及次表面內部缺陷等處形成；在裂紋擴展區，對試樣加載的應力水平越高，裂紋擴展速率也越大。
The fatigue behavior of straight lugs of TC18 titanium alloy is studied. The fatigue Smax—N curves are tested at different heat treatment status and average stresses. The typical fatigue fracture surfaces are observed and analyzed by SEM (scanning electron microscope). The results show that the heat treatment status and the average stress have obvious influence on the fatigue limit; the fatigue limit of the samples, annealed after machining, is upper at the same average stress; the fatigue limit will be longer when the average stresses are higher at the same annealed status; the fatigue crack mainly initiates at inclusion, surface defect or inner defect on sub-surface; the crack propagation rate will be larger when the load stress is higher in the crack propagation region.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.