造孔劑法制備多孔生物醫用Ti2448合金
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-27
采用添加造孔劑的粉末冶金方法制備高強度低模量大塊多孔醫用Ti-24Nb-4Zr-8Sn(質量分?jǐn)?shù)，%，簡稱Ti2448)合金。采用掃描電鏡(SEM)、壓縮試驗和彈性模量儀對其形貌特征、力學性能進行研究。
造孔劑法制備多孔生物醫用Ti2448合金Porous Ti-24Nb-4Zr-8Sn alloy for biomedical applications?fabricated by space-holder method采用添加造孔劑的粉末冶金方法制備高強度低模量大塊多孔醫用Ti-24Nb-4Zr-8Sn(質量分?jǐn)?shù)，%，簡稱Ti2448)合金。采用掃描電鏡(SEM)、壓縮試驗和彈性模量儀對其形貌特征、力學性能進行研究。結果表明：由于造孔劑PMMA(聚甲基丙烯酸甲酯)具有較好的塑性，在冷軋成形過程中能夠保持其原始形狀，故可以制備出孔隙特征參數和力學性能均可調的多孔Ti2448合金；隨著造孔劑粒徑的增加，平均孔徑增加，壓縮強度和彈性模量減?。浑S著燒結溫度的升高，孔隙率和平均孔徑略有減小，壓縮強度和彈性模量增加。
Porous biomedical Ti-24Nb-4Zr-8Sn (mass fraction, %, Ti2448) alloy with high strength and low modulus was fabricated by powder metallurgy which was called space-holder method. The porous structures and mechanical properties of the porous alloy were examined by scanning electron microscopy (SEM), compressive tests and instrument of elastic modulus. The results show that the good plasticity of space-holder (PMMA) greatly facilitates the fabrication of porous Ti2448 alloys with adjustable pore characteristics and mechanical properties. The average pore size of porous Ti2448 alloy increases correspondingly with the increase of size of space-holder, but compressive strength and elastic modulus take on the trend of decreasing. The effect of sintering temperature is not obvious to the average pore diameter and porosity, but compressive strength and elastic modulus increase with the rising of sintering temperature.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.