CT20鈦合金管材的冷彎成型
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-24
航天發動機液氫管路用CT20鈦合金管材冷彎成型過程復雜，實際彎曲中發現原始管材的表面和顯微組織對其影響較大。采用數控彎管機對不同原始狀態管材進行冷彎，采用掃描電鏡和光學顯微鏡等觀察組織和斷口，分析彎管斷裂及表面缺陷的產生原因。
CT20鈦合金管材的冷彎成型Cold bending of CT20 titanium alloy tubes航天發動機液氫管路用CT20鈦合金管材冷彎成型過程復雜，實際彎曲中發現原始管材的表面和顯微組織對其影響較大。采用數控彎管機對不同原始狀態管材進行冷彎，采用掃描電鏡和光學顯微鏡等觀察組織和斷口，分析彎管斷裂及表面缺陷的產生原因。結果表明：表面處理對管材冷彎成型影響不大；等軸組織管材冷彎成型良好，片狀組織管材不能冷彎成型；調整數控彎管機的模具和工藝參數可制備外形質量良好的冷彎管材。
The cold bending process of CT20 titanium alloy tubes used for spaceflight engine tube to carry liquid hydrogen is complex. Numerical control bending tube machine was used to bend the tubes of different original conditions, and the reason for rupture and surface defect of the bending tubes was studied by SEM and TEM. The results show that surface processing has a limited influence on tubes bending, and tubes with isometric microstructure can be bended while those with lath microstructure cannot be bended. The bending tubes with good quality can be processed by adjusting the die and parameter of numerical control bending tube machine.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.