熱處理工藝對SP-700鈦合金組織性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-20
為了提高國產SP-700鈦合金的性能，對SP-700鈦合金熱處理的工藝進行研究。采用不同固溶溫度、時效溫度以及時效時間的處理方法，分析熱處理工藝對該鈦合金組織和性能的影響。
熱處理工藝對SP-700鈦合金組織性能的影響Effect of heat treatment process on structures and properties of?SP-700 titanium alloy為了提高國產SP-700鈦合金的性能，對SP-700鈦合金熱處理的工藝進行研究。采用不同固溶溫度、時效溫度以及時效時間的處理方法，分析熱處理工藝對該鈦合金組織和性能的影響。研究結果表明：鈦合金強度隨著固溶溫度的升高而提高，其原因是次生α相的析出量增加；控制時效溫度和時效時間，可以控制次生α相的形狀和尺寸，從而能獲得強度和塑性的最佳匹配；于850 ℃進行固溶處理并采用水冷，然后，在510 ℃或550 ℃時效可使SP-700鈦合金獲得較好的強度?塑性匹配。
The heat treatment of SP-700 titanium alloy was studied to improve the property of homemade SP-700 titanium alloy. By using different solutions and aging temperatures as well as aging time, the effects of heat treatment process on microstructure and properties of SP-700 titanium alloy were systematically studied. The results show that the alloy strength increases with solid solution temperature due to the fact that the number of secondary α increases. To control aging temperature and aging time can control the shape and size secondary α, to obtain the optimum combination of strength with plasticity. Solution treating at 850 ℃, cooling to room temperature by water, and then aging at 510 ℃ or 550 ℃ will help the alloy to obtain the optimum combination of strength with plasticity.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.