Ti-6554鈦合金的晶粒長大動力學
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-08
研究了Ti-6554(Ti-6Cr-5Mo-5V-4Al)合金在相變點以上的晶粒長大動力學。
Ti-6554鈦合金的晶粒長大動力學Grain growth dynamics of Ti-6554 titanium alloy研究了Ti-6554(Ti-6Cr-5Mo-5V-4Al)合金在相變點以上的晶粒長大動力學。結果表明：在800 ℃固溶處理時，隨著固溶時間的延長，晶粒的尺寸增加，固溶時間超過60 min后，晶粒長大速度加快。800 ℃時，晶粒平均直徑隨時間的長大方程為 6.16t0.5。固溶時間為30 min時，隨著固溶溫度的升高，合金的晶粒尺寸增大，920 ℃固溶處理后，晶粒明顯粗化。在本研究的溫度和時間范圍內，固溶溫度對晶粒度的影響更為顯著。
The grain growth kinetics of Ti-6Cr-5Mo-5V-4Al alloy solution treated above β transformation temperature was studied. The result indicates that, when the alloy is solution treated at 800 ℃, grain size increases with solution time prolonging. Increasing velocity of grain size will be accelerated when solution time is more than 60 min. When the alloy is solution treated at 800 ℃, the function of average grain diameter increasing with solution time is 6.16t0.5. When the alloy is solution treated for 30 min, grain size increases with solution temperature rising, and grain coarsening is obvious at 920 ℃. For temperature and time range in this research, grain size is more sensitive to solution temperature.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.