熱變形參數對BTi?62421S合金微觀組織及性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-06
在Gleeble?3800熱模擬實驗機上對BTi?62421S合金鑄態材料，在溫度850～1 050 ℃、應變速率0.01～30 s?1、變形程度70%條件下進行了等溫恒應變速率壓縮實驗。通過金相分析，研究熱變形參數(變形溫度、應變速率)對BTi?62421S合金微觀組織的影響。
熱變形參數對BTi?62421S合金微觀組織及性能的影響Effect of hot deformation parameters on microstructures and?properties of BTi?62421S alloy在Gleeble?3800熱模擬實驗機上對BTi?62421S合金鑄態材料，在溫度850～1 050 ℃、應變速率0.01～30 s?1、變形程度70%條件下進行了等溫恒應變速率壓縮實驗。通過金相分析，研究熱變形參數(變形溫度、應變速率)對BTi?62421S合金微觀組織的影響。結果表明，變形溫度和應變速率顯著影響片層組織等軸化的程度，在β相變點以下，隨著溫度的升高，片層組織等軸化程度增大，組織更均勻。對變形后的試樣做了硬度實驗，結果表明合金的硬度開始隨著溫度的升高而升高，出現峰值后降低。
The compression test of BTi?62421S alloy was carried out at temperatures of 850?1 050 ℃, strain rates of 0.01?30 s?1?and deformation of 70% by the Gleeble?3800 thermal-mechanical simulator. The effects of hot deformation parameters on microstructure of the alloy were investigated by optical microscopy. The results show that the equiaxial degree of lamellar structure is significantly affected by hot deformation parameters, including deformation temperature and strain rate. The deformation temperature and strain rate have significant effects on the equiaxial degree of lamellar structure. The phenomenon (the equiaxial degree of lamellar structure) is increased and the microstructure of alloy is more uniform with the temperature increasing below β phase transition point. Moreover, it can be also seen from hardness test that the hardness of the alloy increases firstly and then decreases with the temperature increasing.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.