鍛造溫度對TC4-DT鈦合金棒材力學性能及顯微組織的影響
發布人：上海艾荔艾金屬材料有限公司www.bt990.com.cn
更新時間：2016-01-04
研究不同的鍛造溫度對TC4-DT棒材力學性能及顯微組織的影響。
鍛造溫度對TC4-DT鈦合金棒材力學性能及顯微組織的影響Effect of forging temperature on mechanical property and microstructure of TC4-DT titanium研究不同的鍛造溫度對TC4-DT棒材力學性能及顯微組織的影響。結果表明：隨著鍛造溫度的升高，試樣的室溫強度和塑性明顯提高，但當溫度升高到相變點以上時，強度開始降低。從顯微組織來看，在相變點以下時，溫度的升高導致初生α相含量明顯降低，條狀次生α相明顯增多；當溫度升高到相變點以上時，得到片狀組織，溫度越高，片狀組織越粗大。因此，細小的次生α相對于強度的貢獻要大于初生α相，原因是采用了同樣的熱處理制度，固溶強化的效果基本相同，強化作用主要由界面產生。
The effects of forging temperature on mechanical property and microstructure of TC4-DT titanium were researched. The results show that the room temperature tensile intensity and plasticity of samples increase with increasing forging temperature below transformation temperature. And room temperature tensile intensity increases when the forging temperature increases above the transformation temperature. With increasing forging temperature under transformation temperature, the primary α phase is reduced, and secondary α phase obviously increases. While forging temperature is above transformation temperature, the film structure appears. And film structure grows large with increasing forging temperature. Therefore, secondary α phase is more favorable to intensity.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.