半固態與鑄態7A04鋁合金腐蝕行為的對比
發布人：上海艾荔艾金屬材料有限公司www.bt990.com.cn
更新時間：2015-12-31
利用金相顯微鏡分析7A04鋁合金半固態與鑄態組織，對半固態與鑄態7A04鋁合金進行極化曲線與阻抗譜電化學測試分析，通過中性鹽霧實驗對比分析二者的質量損失率、腐蝕面積率和腐蝕坑深度，并采用激光共聚焦顯微鏡分析腐蝕形貌差異。
半固態與鑄態7A04鋁合金腐蝕行為的對比Comparison of corrosion behaviors of semi-solid and as-cast 7A04 aluminum alloy利用金相顯微鏡分析7A04鋁合金半固態與鑄態組織，對半固態與鑄態7A04鋁合金進行極化曲線與阻抗譜電化學測試分析，通過中性鹽霧實驗對比分析二者的質量損失率、腐蝕面積率和腐蝕坑深度，并采用激光共聚焦顯微鏡分析腐蝕形貌差異。結果表明：半固態初生α(Al)晶粒細小圓整，半固態試樣的耐腐蝕性能優于鑄態試樣的，半固態試樣腐蝕質量損失率較低，半固態試樣的蝕坑平均深度及最大深度均小于鑄態試樣的。半固態工藝可顯著提高7A04鋁合金的耐腐蝕性能。
The microstructure of semi-solid and as-cast 7A04 aluminum alloys was studied by optical microscopy, and the electrochemical corrosion behavior was investigated mainly by polarization curve and impedance spectroscopy. The mass loss rate, corrosion area rate and corrosion depth were researched by the salt spray corrosion, the corrosion morphologies were observed by laser scanning confocal microscopy. The results show that the semi-solid processing leads to a structure with fine and round grains (primary α(Al)), corrosion resistance of semi-solid sample is better than that of the as-cast sample. Both mass-loss and average corrosion depth of semi-solid sample are smaller than those of the as-cast sample. The semi-solid processing can improve the corrosion resistance of 7A04 aluminum alloy obviously.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.