新聞資訊
熔體過熱處理對AZ31鎂合金凝固組織的影響
發布人：上海艾荔艾金屬材料有限公司www.bt990.com.cn
更新時間：2015-12-05
研究750、800、850、900和950 ℃不同熔體過熱處理溫度對AZ31鎂合金凝固組織的影響規律。利用光學顯微組織定量分析經不同溫度過熱處理所得AZ31鎂合金的二次枝晶間距等組織特征差異；開發一種采用能譜分析結果計算Mg、Al和Zn等主要元素在一個枝晶單元內各個特征區域質量分?jǐn)?shù)的方法，用以測評不同過熱溫度下凝固組織的成分均勻性。
熔體過熱處理對AZ31鎂合金凝固組織的影響Effect of melt superheating treatment on?solidification microstructure of AZ31 magnesium alloy
研究750、800、850、900和950 ℃不同熔體過熱處理溫度對AZ31鎂合金凝固組織的影響規律。利用光學顯微組織定量分析經不同溫度過熱處理所得AZ31鎂合金的二次枝晶間距等組織特征差異；開發一種采用能譜分析結果計算Mg、Al和Zn等主要元素在一個枝晶單元內各個特征區域質量分?jǐn)?shù)的方法，用以測評不同過熱溫度下凝固組織的成分均勻性。結果表明：當過熱溫度從750 ℃增加到900 ℃時，成分偏析減少，鑄態組織中二次枝晶間距從13 μm減小到9 μm，多點隨機顯微硬度的平均值從36.5 HV增大到42.6 HV；AZ31鎂合金較理想的熔體過熱處理溫度為900 ℃。
The effect of different overheating temperatures on the solidification microstructure of AZ31 magnesium alloy was investigated. The overheating temperatures of 750, 800, 850, 900 and 950 ℃ were applied. The secondary dendrite spacing of AZ31 magnesium alloy at different overheating temperatures was quantitatively investigated through the optical microstructures. A method was developed to analyze the mass fraction of Mg, Al and Zn elements in each region of a dendrite cell by scanning electron microscope with energy spectrum, which was used to assess the component homogenization of the solidification microstructures at different overheating temperatures. The results show that with the increase of overheating temperature from 750 to 900 ℃, the chemical composition segregation is reduced, the secondary dendrite spacing is decreased from 13 to 9 μm, and the average value of multi-point random microhardness is increased from 36.5 HV to 42.6 HV. The better melt overheating temperature of AZ31 magnesium alloy is 900 ℃.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.
前一頁：熱連軋對GH4169合金蠕變行為的影響
后一頁：時效工藝對1933鋁合金鍛件腐蝕性能的影響