新聞資訊
30CrMnSiA合金鋼當量加速腐蝕試驗
發布人:上海艾荔艾金屬材料有限公司www.bt990.com.cn
更新時間:2015-04-18
基于某海域艦面停放環境譜,采用30CrMnSiA材料制備模擬件,在某海域采取懸掛方式開展自然暴露試驗的同時在試驗室環境下開展了加速腐蝕試驗。
基于某海域艦面停放環境譜,采用30CrMnSiA材料制備模擬件,在某海域采取懸掛方式開展自然暴露試驗的同時在試驗室環境下開展了加速腐蝕試驗。對腐蝕后試樣的失重和疲勞壽命進行了測試,結果表明,30CrMnSiA試驗件在當量加速腐蝕試驗時間和某海域自然老化時間匹配時,腐蝕失重和疲勞壽命在95%置信度下一致。
Based on the environmental spectrum of a certain area, 30CrMnSiA was used to prepare specimens of bolted lap joints. Part of joints were tested in field accelerated environment corrosion testing was carried out in laboratory . Weight loss and fatigue life were used to evaluate the corrosion degree. The results showed that the weight loss and fatigue life for accelerated corrosion and natural aging corrosion were consistent at the confidence level of 95% in matched time.
以上資料由上海艾荔艾金屬材料有限公司提供,歡迎新老客戶來電洽購。
本文來自上海艾荔艾金屬材料有限公司http://www.bt990.com.cn,轉載請注明出處。
前一頁:AFNOR XC18S法國低碳碳素結構鋼化學成分力學物理性能
后一頁:65Mn、35Cr2Ni3MoV和AF1410在模擬海洋環境中的耐蝕性